Heat Pump Installation in Pittsburgh, PA

Upgrade to year-round comfort with a high-efficiency heat pump. Our NATE-certified installers use precise Manual J calculations to right-size your system. All installations qualify for up to $2,000 in IRA federal tax credits. Call 1-412-388-9408.

WHY HEAT PUMPS

One System. All-Season Comfort. Massive Savings.

A modern heat pump replaces both your air conditioner and your heating system with a single, highly efficient unit. In the summer it cools your home. In the winter it extracts heat from outside air — even at 5°F — and pumps it indoors.

For Pittsburgh homeowners who already have ductwork, upgrading to a heat pump is one of the smartest home improvements available — especially with the current $2,000 federal tax credit and local utility rebates.

  • Replaces both your AC and heating system in one unit
  • 300–400% energy efficiency (vs. 95–98% for gas furnace)
  • Qualifies for $2,000 IRA 25C federal tax credit
  • Duquesne Light & West Penn Power rebates available
  • Works in Pittsburgh winters down to 5°F
GET A FREE INSTALL ESTIMATE
300%+
Energy Efficiency
vs. 98% max for gas furnace
$2,000
IRA Tax Credit
For qualifying systems
5°F
Heating Capability
Cold-climate technology
1 Day
Install Time
Most replacements
OUR PROCESS

How We Install Your Heat Pump

Every installation follows our proven 6-step process — ensuring your system is precisely sized, correctly charged, and fully commissioned on day one.

01

Free Home Assessment & Manual J Load Calc

We visit your home and perform a precise Manual J load calculation — measuring square footage, insulation R-values, window area, ceiling height, and infiltration rate. This determines the exact tonnage your home needs. Never too big, never too small.

02

System Selection & Rebate Pre-Qualification

We recommend 2–3 systems from leading brands (Bosch, Trane, Carrier) that fit your home's calculated load and qualify for the maximum $2,000 IRA tax credit and available Duquesne Light rebates. You choose, we handle the paperwork.

03

Electrical & Ductwork Preparation

We confirm your electrical panel can support the new system. If ductwork modifications are needed (supply/return sizing), our sheet metal team handles them before installation day to prevent any delays.

04

Precision Installation

Our installation crew sets the outdoor condenser on a new pad, installs the indoor air handler, runs new refrigerant line sets, and connects all electrical and control wiring to exact manufacturer specifications.

05

Vacuum, Charge & Commissioning

We pull a deep vacuum (500 microns or below) to remove all moisture and non-condensables from the refrigerant circuit. We then charge the system to the manufacturer's exact specification using digital manifold gauges — never guessing.

06

Smart Thermostat Setup & Homeowner Training

We install and program your new thermostat (Nest, Ecobee, or included model), connect it to the heat pump's staging, and walk you through operation, filter maintenance, and how to read your system's behavior in heating vs. cooling mode.

SYSTEM SELECTION

Top Heat Pump Brands We Install

We only install systems from manufacturers with proven track records for reliability and efficiency in cold-climate applications.

Bosch
IDS 2.0 Premium
Best Overall
  • SEER2 up to 20.2
  • HSPF2 up to 10.2
  • Ultra-quiet 56 dB operation
  • Works down to -13°F
  • 10-year parts warranty
Trane
XV20i Variable Speed
Most Reliable
  • SEER2 up to 22
  • Communicating system compatible
  • ComfortLink II thermostat
  • TruComfort variable speed
  • 12-year unit warranty
Carrier
Infinity 24 with Greenspeed
Best Efficiency
  • SEER2 up to 24
  • Infinity communicating control
  • Greenspeed intelligence
  • Extreme quiet 51 dB
  • 10-year parts warranty
2026 PRICING

Heat Pump Installation Pricing in Pittsburgh

All-inclusive pricing: equipment, labor, new line sets, pad, and commissioning. We apply all rebates and prepare your tax credit documentation.

1.5–2 Ton Heat Pump System
1.5–2 Ton Heat Pump System$6,500 – $8,500

For homes up to 1,400 sq ft. Includes condenser, air handler, line set, pad, and all electrical.

2.5–3 Ton Heat Pump System
2.5–3 Ton Heat Pump System$7,500 – $10,000

For homes 1,400 – 2,200 sq ft. Most common size for Pittsburgh single-family homes.

3.5–5 Ton Heat Pump System
3.5–5 Ton Heat Pump System$9,500 – $12,000+

For larger homes 2,200+ sq ft. May require two-stage or variable-speed compressor.

Ductwork Modifications
Ductwork ModificationsVaries by scope

Return air upgrades, supply resizing, or new trunk lines — priced separately after assessment.

FEDERAL INCENTIVE

Save Up to
$2,000
in Tax Credits

The IRA 25C credit covers 30% of your installation cost, up to $2,000, for qualifying high-efficiency heat pump systems.

Additional Savings Available:

  • Duquesne Light Company Rebates
  • West Penn Power Rebates
  • Manufacturer Seasonal Rebates
CHECK YOUR REBATE ELIGIBILITY
WHY CHOOSE US

Pittsburgh's Heat Pump Installation Experts

Manual J — Every Time

We never guess at system size. Every installation starts with a full Manual J load calculation. Oversized heat pumps short-cycle, wear out early, and leave you with uncomfortable humidity.

NATE-Certified Installers

Heat pumps require precise vacuum and refrigerant charge procedures. Our NATE-certified team uses digital manifold gauges and micron meters — not rule of thumb estimates.

Tax Credit Documentation

We provide all the manufacturer efficiency certificates and installation receipts needed to claim your $2,000 IRA 25C tax credit when you file. We handle the rebate applications too.

10-Year Installation Warranty

In addition to manufacturer parts warranties, we stand behind our workmanship for 10 years. If an installation error causes a problem, we fix it — on us.

Heat pump installation Pittsburgh PA
1-412-388-9408
acpittsburghpa@gmail.com
FAQ

Heat Pump Installation Questions

How much does heat pump installation cost in Pittsburgh?
A complete heat pump installation in Pittsburgh typically costs between $6,500 and $12,000+, depending on the system size (tonnage), SEER2 efficiency rating, and ductwork modifications required. High-efficiency systems qualify for a $2,000 IRA 25C federal tax credit, significantly reducing your net cost.
How long does heat pump installation take?
A standard heat pump replacement (swapping an old AC or heat pump for a new one) takes one full day — typically 6 to 8 hours. If ductwork modifications or a new electrical circuit are required, it may take 1.5 to 2 days.
What size heat pump do I need for my home?
Heat pump sizing requires a Manual J load calculation that factors in square footage, insulation levels, window count, ceiling height, and local Pittsburgh climate data. We perform this on every installation. Never let a contractor size your system based on square footage alone.
Does a heat pump work well in Pittsburgh winters?
Yes. Modern cold-climate heat pumps are engineered to extract heat from outdoor air even at 5°F. On Pittsburgh's coldest days, the system supplements with auxiliary electric heat strips or can be paired with your existing gas furnace in a dual-fuel setup.
Does a new heat pump qualify for the $2,000 IRA tax credit?
Yes. Qualifying high-efficiency heat pump installations are eligible for a federal tax credit equal to 30% of the total project cost, up to $2,000 per year. We install systems that meet the efficiency thresholds and provide all the documentation needed to claim the credit.

Heat Pump Installation Across Allegheny County

Professional heat pump installations for homes across Greater Pittsburgh.

📍 Pittsburgh
📍 Mt. Lebanon
📍 Bethel Park
📍 Canonsburg
📍 Monroeville
📍 Penn Hills
📍 Allison Park
📍 Carnegie
📍 Bridgeville
📍 North Hills
📍 Moon Township
📍 Cranberry Township
📍 Coraopolis
📍 Shadyside
📍 Squirrel Hill
📍 West Mifflin

Ready to Install a Heat Pump?

Call today for a free in-home estimate. We'll size your system correctly, maximize your rebates, and install it right the first time.

CALL 1-412-388-9408GET FREE ESTIMATE
CALL FOR EMERGENCY SERVICES